Hexonic APFI LC110-41-60 insulation for heat exchanger, polyurethane foam, 30 mm
- Application: thermal insulation for heat exchangers in heating/cooling systems
- Material: polyurethane foam (PUR), aluminum cover
- Thickness: 30 mm
- Max working temperature: 135 °C
What APFI LC110-41-60 is for
This insulation shell is designed specifically for Hexonic LC110 series exchangers with 41-60 plates. Suitable for substations, DHW systems, geothermal heating, water-jacket fireplace generators, and low-flow cooling system exchangers. The aluminum cover provides mechanical protection and a clean appearance in the technical room.
Technical specifications
| Parameter | Value |
|---|---|
| Code | 2102-0076 |
| Model | APFI LC110-41-60 |
| Compatibility | Hexonic LC110 series exchangers with 41-60 plates |
| Material (insulator) | Polyurethane foam (PUR) |
| Material (cover) | Aluminum cover |
| Thickness | 30 mm (1.18 in) |
| Max working temperature | 135 °C / 275 °F |
| Thermal conductivity (λ) | 0.026 W/mK |
| Weight | ~3 kg |
| Installation | On-site, wrapping around the exchanger |
Why insulation matters
- Heat loss reduction: an uninsulated exchanger loses 200-500 W (depending on size and T). Over a year — 1-4 MWh of wasted heat
- Personnel protection: surface temperature without insulation can reach 80-95 °C. With APFI — reduced to <40 °C (safe to touch)
- Condensate prevention in cooling systems: cold exchanger surfaces attract room humidity — insulation prevents dripping
- Regulatory compliance: most substation design standards mandate insulation
Installation
APFI insulation shells are installed on-site — wrapped around the exchanger. Consist of two parts (front and back) joined with clamps. Only ~40 mm of extra clearance around the exchanger is required. No special tools needed.
B2B delivery and logistics via Amegata.lt
- 24-hour delivery across Lithuania (from our warehouse in Vilnius)
- Ordered together with the exchanger — single shipment, lower logistics cost
- 30-day payment terms for companies (per contract)
Official Hexonic catalogue: hexonic.com/brazed-plate-exchangers/L
Frequently asked questions
Does APFI fit my exchanger?
This model fits Hexonic LC110 series exchangers with 41-60 plates. Other sizes — other APFI variants (see our catalogue). If unsure — provide the exchanger SKU and we will verify compatibility.
Can it be used in cooling systems?
Yes, down to -40 °C. In cooling systems APFI helps avoid condensate on cold surfaces. For very low temperatures (<-40 °C) — special "cold zone" insulation with an additional vapour barrier is needed.
Are special installation tools needed?
No. APFI shells snap on by hand and are secured with the included clamps. Installation takes about 10-15 minutes.
Can it be removed and reinstalled?
Yes. The design allows easy removal for service (e.g., CIP flushing) and reinstallation without damage.
