Danfoss XB52M-2 60/60 CoResist brazed plate heat exchanger, PN 25

Danfoss XB52M-2 60/60 CoResist brazed plate heat exchanger, PN 25

€ 5510,00+ PVM
SKU
079G1799
Model
XB52M-2 60/60 CoResist
Delivery
Contact for delivery term
Brand
Danfoss
product_analogue
lc110902s
Number Of Plates
120
Connection nozzles
6
degrees
2
Connection Type
iorsriegis_dn50
Old Type
xb_51h2
used_for
silumokaitis_karstam_vandeniui
min_temp
10
max_temp
180
operating_pressure
25
Weight
40.1kg.
TL;DR: Danfoss XB52M-2 60/60 CoResist — brazed plate heat exchanger with 120 plates (60 + 60) with enhanced corrosion resistance (CoResist (Cu+) brazing filler). PN 25, suitable for district heating and domestic hot water (DHW) systems.
  • Code: 079G1799
  • Series: Danfoss XB52 Micro Plate
  • Model: XB52M-2 60/60 CoResist
  • Number of plates: 120 (60 + 60)

Where XB52M-2 60/60 CoResist is used

This 120-plate (60 + 60) brazed heat exchanger is designed for user branches in substations of multi-family and commercial buildings. Primary side from district heating network, secondary side for space heating or DHW production. The CoResist variant enables use in systems with aggressive (chlorides, ammonia) water, where standard copper brazing would be unsuitable. For hard water with elevated Ca/Mg carbonate content, limescale gradually builds up on the plates and reduces heat-transfer efficiency; for such systems gasketed (plate-and-frame) exchangers are preferable, as they can be periodically opened for mechanical or CIP cleaning.

Technical specifications

Parameter Value
Code079G1799
SeriesDanfoss XB52 Micro Plate
ModelXB52M-2 60/60 CoResist
Number of plates120 (60 + 60)
Nominal pressure (PN)25 bar
Connection (ISO 228/1)G 2" external thread
Plate materialStainless steel AISI 316L (1.4404)
Brazing fillerCoResist (Cu+)
Temperature range−196 °C … +180 °C
MediaDistrict heating water; glycol up to 50%; aggressive water (CoResist)
Weight40.1 kg
Height (without supports)467 mm
PED categoryPED 2014/68/EU, category II
Configuration2-pass

Heat capacity — quick calculation

Formula: P = Q × ΔT × 1.163 (kW, Q m³/h, ΔT °C).

Illustrative calculation, not this model's capacity. Example: heating mode (90/70 °C → 65/40 °C) at Q = 3.6 m³/h and ΔT ≈ 20 °C → P ≈ 83 kW.

Designer note: Before final XB52M-2 60/60 CoResist selection use Danfoss HEXact sizing software — exact capacity depends on plate geometry, media properties and system load profile.

When to choose XB52M-2 60/60 CoResist

  • Substation user branches
  • DHW primary heat exchanger for multi-family systems (aggressive water)
  • When PED cat II certification is required for commercial buildings
  • CoResist variant — for regions with elevated chloride content in water

B2B delivery and logistics via Amegata.lt

  • 24-hour delivery across Lithuania (from our warehouse in Vilnius)
  • Competitive B2B pricing — often below market average
  • 30-day payment terms for companies (per contract)
  • Free technical consultation for XB52M-2 60/60 CoResist selection

Frequently asked questions

How does XB 12L-2 CoResist differ from standard XB 12L-2 (with Cu brazing)?

CoResist (Cu+) brazing is, per Danfoss, a medium corrosion resistance brazing type (standard Cu - standard resistance, full stainless steel StS - highest). Standard with Cu — cheaper, suitable for standard district heating water. For hard water with elevated Ca/Mg carbonate content, limescale gradually builds up on the plates and reduces heat-transfer efficiency; for such systems gasketed (plate-and-frame) exchangers are preferable, as they can be periodically opened for mechanical or CIP cleaning.

Is it suitable for potable water (DHW)?

The Danfoss XB certificate list includes SVGW, Kiwa and PZH drinking-water hygiene certificates (not valid for every code); verify the specific code against the Danfoss certificate list.

What maintenance is required?

Brazed gasket-free construction requires no periodic disassembly. Only CIP (Clean-in-Place) flushing every 3-5 years is recommended, if fouling signs appear.

Can glycol mixtures be used?

Yes, ethylene glycol or propylene glycol solutions up to 50%, with appropriate inhibitors. For DHW — only potable-grade fluids.

What are the PED requirements?

XB series complies with PED 2014/68/EU, category II (medium risk level) — allowing commercial use in Europe.

  • About us

  • HELP AND INFORMATION

  • CONNECT WITH US

Notify me of new products
By clicking the "Subscribe" button, you agree to the Privacy Policy. You will always find a link in the newsletter that you can click to unsubscribe from.

@ 2024-2026. All rights reserved.

    Solution: e-bros