This 40-plate brazed heat exchanger with a "M" (Medium theta) profile — medium chevron angle — balanced Δp and heat transfer. The CB110 series comprises compact, hermetic units that reliably separate primary and secondary loops in large commercial and industrial systems (district heating stations, process heat). The brazed gasket-free construction requires no periodic maintenance that gasketed exchangers would need — this reduces operating costs across the equipment lifecycle.
| Parameter | Value |
|---|---|
| Code | 3287130323 |
| Series | Alfa Laval CB110 |
| Model | CB110-40M |
| Number of plates | 40 |
| Chevron profile | M (Medium theta) |
| Nominal pressure (PN) | 27 bar |
| Max. temperature | 225 °C |
| Connection | G 2" external thread (S1-S4) |
| Plate material | Stainless steel |
| Brazing filler | Copper |
| Construction | Brazed, hermetic (gasket-free) |
| Media | Water, glycol solutions, other media compatible with stainless steel and copper |
Capacity depends on flow rate, ΔT and logarithmic mean temperature difference (LMTD). General formula: P = Q × ΔT × 1.163 (kW, Q m³/h, ΔT °C).
General formula example (not this model's capacity), heating mode (primary 90/70 °C → secondary 65/40 °C): at Q = 10 m³/h and effective ΔT ≈ 20 °C → P ≈ 233 kW. With Q = 15 m³/h and ΔT ≈ 25 °C → P ≈ 436 kW.
"M" (Medium theta) — medium chevron angle. Balanced heat transfer and pressure drop. Suits most HVAC and DHW regimes.
Yes. CB110 series exchangers are compatible with ethylene glycol and propylene glycol solutions, when appropriate inhibitors are used. For DHW — only potable-grade fluids allowed.
Brazed gasket-free construction requires no periodic disassembly maintenance. Recommended only CIP (Clean-in-Place) flushing every 3-5 years if fouling signs appear (rising pressure drop or falling heat transfer).
For compliance with potable water system requirements (certificates depend on the country), contact us — we will provide the manufacturer's documents.
In some regions, district heating water contains elevated chlorides or ammonia — in such systems, copper brazing may shorten the exchanger's service life. In these cases we recommend the Danfoss XB CoResist series. For hard water with elevated Ca/Mg carbonate content, limescale gradually builds up on the plates and reduces heat-transfer efficiency; for such systems gasketed (plate-and-frame) exchangers are preferable, as they can be periodically opened for mechanical or CIP cleaning. Contact us — we will select the model best suited to your water conditions.
Plate count is determined by required capacity, flow rates and allowable pressure drop. The same CB110 series with different plate counts covers different capacity classes — from small user branches to large primary loops. Contact us — we will provide a specific selection based on your project data.