Flamco T-Plus DN50 × Rp 1¼" cast iron tapping saddle, PN 25
- Pipe size: DN50 (2", ~60 mm OD)
- Branch connection: Rp 1¼" female thread
- Working pressure / temperature: PN 25 / up to 130 °C
- Body material: cast iron with anti-corrosion coating
Where T-Plus DN50 is used
This size is typically chosen for multi-family substations and medium commercial heating/cooling networks, where DN50 is the main user branch or return line. Used when adding a branch (new pump, measurement point, DHW module, secondary loop) to an operational system — maintaining pressure and flow throughout. Installation time with an experienced technician: 10-15 minutes.
Technical specifications
| Parameter | Value |
|---|---|
| Code | 90650 |
| Manufacturer | Flamco (Aalberts HFC) |
| Series | T-plus cast iron |
| Nominal pipe diameter | DN50 (2") |
| Branch connection | Rp 1¼" (female thread) |
| Nominal pressure PN | 25 bar |
| Max operating temperature | 130 °C |
| Body material | Cast iron with anti-corrosion coating |
| Compatible pipes | Steel (St33/34/35/37) per DIN 2441 / NEN 3257 C Heavy / BS 1387 Heavy |
| Wall thickness (steel DN50) | ~3.6-4.0 mm (Heavy grade) |
| Media | Water, glycol solutions up to 50 %, compressed air |
| Piercing mechanism | Single-shot, integrated |
When to choose T-Plus DN50
- Multi-family substation DN50 mainline branching
- New user node (pump, DHW module, measurement point) on live network
- Renovation and expansion works without system draining
- Industrial compressed air or hot water networks (up to 130 °C)
- Compatibility: DN50 Heavy grade steel — verify wall before installation
B2B delivery and logistics via Amegata.lt
- 24-hour delivery across Lithuania (from our warehouse in Vilnius)
- Competitive B2B pricing — often below market average
- 30-day payment terms for companies (per contract)
- Free technical consultation on pipe compatibility
Official Flamco catalogue: flamcogroup.com/T-plus
Frequently asked questions
Is T-Plus DN50 leak-tight for its service life?
Yes — the integrated seal is engineered for full pipe service life under rated conditions. Seal failure typically only follows body damage or exceeding PN 25 / 130 °C limits.
What does Rp 1¼" mean?
Rp — per ISO 7-1, a parallel female thread, matching common installation adapters. Verify the mating branch has matching R (tapered) or G (parallel) male thread with sealing.
Glycol mixtures allowed?
Yes, up to 50 % ethylene or propylene glycol with appropriate inhibitors. Higher concentrations may impact seal longevity — contact us for specifics.
What maintenance is required?
An installed T-Plus needs no periodic maintenance. A visual annual check is recommended (leak marks, corrosion, connector condition).
When does it need replacement?
Signs: visible moisture on the body, seal-edge corrosion, or pressure drop in the connected branch. Replacement requires system drain-down.
