Schneider Electric SpaceLogic M800 electric linear actuator, 800 N, 0-10 V, 24 V AC/DC, up to 52 mm stroke
- Application: modulating actuation of medium-to-large globe valves in commercial BMS installations
- Force: 800 N; stroke up to 52 mm (15/20/30 s by stroke)
- Power / control: 24 V AC/DC, 0-10 V DC (switchable 2-10 / 0-5 / 5-10 V) or 3-point
- Runtime / IP: 15 s (9-25 mm), 20 s (25-32 mm), 30 s (32-52 mm), IP54
Where SpaceLogic M800 is used
SpaceLogic (Forta) M800 is selected for higher-load control valves — commercial buildings, industrial installations, larger substations and central cooling systems where 800 N force and wider stroke (up to 52 mm) are needed with medium-to-large DN globe valves. It is a standard pick with Schneider V241 (DN25-DN100 2-way), V311 and V321 (3-way) globe valves.
The brushless DC motor with microprocessor control delivers long service life without sensor wear. Field-selectable control signal (0-10 / 2-10 / 0-5 / 5-10 V DC or 3-point) lets the same actuator work in modern SpaceLogic BMS installations and in retrofit projects with Danfoss ECL, Siemens Climatix, Trend IQ or older Ouman controllers.
Technical specifications
| Parameter | Value |
|---|---|
| Code | 8800310030 |
| Series | Schneider Electric SpaceLogic Forta M800 |
| Type | Modulating linear actuator (brushless DC motor) |
| Force | 800 N |
| Stroke | 9-52 mm (auto-calibration) |
| Runtime (full stroke) | 15 s (9-25 mm), 20 s (25-32 mm), 30 s (32-52 mm) |
| Power supply | 24 V AC (±25 %) / 24 V DC (±10 %), 50/60 Hz |
| Transformer rating | 50 VA |
| Control signal | 0-10 V DC (switchable 2-10 / 0-5 / 5-10 V) or 3-point |
| Signal input impedance | ≤ 100 kΩ |
| Feedback signal | 2-10 V DC position (standard) |
| Duty cycle | 20 % full load, 80 % half load |
| Spring return (fail-safe) | No (valve stays at last position on power loss) |
| Manual override | Yes (auto-disconnects PCBA power); zero-point check on power interruption |
| Auxiliary end-switch relays | Optional (2× SPDT) |
| Ingress protection | IP54 |
| Housing material | Aluminium with ABS/PC cover (aluminium / grey) |
| Ambient temperature | −10…+50 °C |
| Compatibility | Schneider V241 (2-way) DN25-DN100, V311, V321 (3-way) DN25-DN80; legacy VB-7xxx via AV-821, VB-9313 DN65-DN100 via AV-822 adaptor |
When to choose SpaceLogic M800
- Commercial HVAC and cooling system high-load control valves (DN40 and larger)
- Substations with high Δp at the control point (district heating primary side, process systems)
- Domestic hot water (DHW) medium-to-large capacity systems with mid-DN globe valves
- Retrofit replacement of older Satchwell / TAC M800A actuators on VB-7xxx / VB-9313 valves
- Compatibility: Schneider V241 DN25-DN100 2-way, V311, V321 3-way DN25-DN80. Legacy VB-7xxx — with AV-821 adaptor; VB-9313 DN65-DN100 — with AV-822 adaptor.
B2B delivery and logistics via Amegata.lt
- 24-hour delivery across Lithuania (from our warehouse in Vilnius)
- Competitive B2B pricing — often below market average
- 30-day payment terms for companies (per contract)
- Free technical consultation for valve, actuator and adaptor selection
Official Schneider Electric catalogue: se.com/8800310030
Frequently asked questions
How does the M800 differ from the M400?
By two key parameters: force 800 vs 400 N and stroke up to 52 vs 32 mm. M800 is intended for larger DN valves (DN40+) and valves with high Δp at the control point. Electronic control module, housing and configurability are identical.
How does runtime depend on stroke?
The M800 has 3 auto-selected speed steps: 15 s (stroke 9-25 mm), 20 s (25-32 mm) and 30 s (32-52 mm). The selection is automatic based on the auto-calibrated stroke length — no manual configuration required.
Does the M800 have a spring return (fail-safe)?
No — 8800310030 is a non-spring return model. The valve stays at its last position on power loss. If fail-safe is required, choose M800-S1 (spring-open) or M800-S2 (spring-closed) variants.
What transformer size does the M800 need?
Manufacturer-recommended 50 VA transformer per M800 actuator. For a group of 2-3 actuators — a 100 VA transformer with headroom. Inrush current is significant, so the transformer size matters more than for the M400 (7 VA continuous draw).
Does the M800 fit Satchwell VB-9313 DN80 valves?
Yes — with the AV-822 adaptor kit (Schneider F-27702). This kit is specifically designed to mount an M800A / M800 onto older VB-9313 DN65-DN100 globe valves in retrofit projects where the valve is kept and only the actuation is upgraded to SpaceLogic BMS.
